| The new professionals - Kränzle Profi 160 TS T |
| |
| Standard equipment: |
- 5 m power lead
- Cable reel
- Dirtkiller lance
- Steel-weave high-pressure hose, 15 m
- Integrated hose drum
- Total-Stop facility
- Switch-off spray gun with handgrip
- Spray lance (high and low pressure) with stainless steel pipe
- Continuously adjustable pressure control
- Allows application of additives at full operating pressure
- Brass pump head
- Dry-run safety
- Ceramic-coated pump plungers
- Receptacle for switch-off spray gun and lance
- Holding device for Dirtkiller
- Mobile on stairs
- Industrial pump for continuous operation
|
 |
| |
The new family of Professionals represents the consequent further development of the proven Kränzle T-series. The new Professionals convince by a modern future-orientated design and enhanced engineering. An extremely over-dimensioned gear is built in for example helping to extend the shelf life of the cleaners considerably. In addition the open type design offers a maintenance friendly access to all important parts.
Main advantages of the Kränzle principle of arrangement are the integral hose drum, receptacles for HP gun, Dirtkiller and lance together with the winding-up device for the power cable. Everything is attached to the appliance, easily accessible and it can be used and operated without any problems. Compared to the T-series the hose drum is even considerably bigger facilitating the winding up of the hose. |
| |
| With integrated hose drum: |
| The fixed hose drum puts order into the system. Never again entangled or carelessly layed down high-pressure hoses, that have to be detected or disentangled before starting work. And moreover – the durability of the hoses is substantially extended! |
| |
| With Total-Stop-System: |
| Use master switch to activate unit and to automatically start motor when actuating the high pressure gun. Closing the gun causes the motor to automatically stop. The unit remains operational until master switch is turned off. |
| |
| Roto-Mold Chassis: |
| The complete chassis consists of one single part manufactured in the extremely robust rotation sinter procedure and encloses the motor pump unit like a rollover cage. In order to pass the power flow from the wheels onto the chassis, the steel axle is welded to a laser cut mold plate. |
| |
| With water tank: |
| As with all Profi models, the water tank is designed to serve as a water reservoir and surge tank between piping system and pump. No tools are needed for assembly or disassembly. The tank is only required when additives are being applied at full operating pressure. |
| |
| With detergent supply at the suction side: |
| Detergent suction at the pressure side, as used for standard machines, consume approx. 30 % of the energy, no matter if they are in operation or not. Due to the water tank in all Kränzle Profi cleaners it is now possible to suck detergents directly into the pump, preventing a decrease in the output and thus leading to an increase of the efficiency. The detergents can be sprayed without reducing the operating pressure. The unit can at all times be operated without the water tank, e.g. when sucking from external sources or connecting to high pressure pipe. |
| |
|
| |
| Search-terms: kranzle high pressure cleaner, high pressure plunger pump, Industrial Cleaners, Industrial Cleaning Equipment, high pressure hose, high pressure water gun, Kranzle, High pressure water jet pump, High pressure cleaning pump, Water jet pump, High pressure water jet pumps india,pressure jet pump, water tank cleaning machine, Tank cleaning machine, Tank Cleaners, Pressure Washers |
| |
