| Hose |
|
| Our double braided hose is of the highest quality and we are proud that we supply a product that is long lasting and durable to suit the hot and cold water under-pressure cleaning application. Too often one finds that because of lower cost, normal hydraulic hose is used in high pressure application. In the industrial application, this is not the correct product for working under pressure especially when combined with heat and could burst causing injury to the operator or staff. You can be assured that our double steel-braided hose that you have acquired is safer, supplies an extended service life and greatly reduces the cost of repairing incorrect hose-type application. |
 |
| |
|
| Guns |
|
| Kranzle Starlet high pressure gun – Heavy duty gun Kranzle Pico high pressure gun |
 |
| |
|
| Lances |
|
| TRICK!!! When using a bent lance the pressure of the machine feels stronger than when using a straight lance. The bent lance cause the “kick’ of the machine to be upwards and the person using thinks the machine is stronger – NOT True!! |
 |
| |
|
| Foaming lance |
|
| Manufactured from stainless steel and when used in conjunction with our chemical under high pressure injector, creates foam for cleaning of work surfaces, kitchens, food factories, vehicles, trucks etc.. |
 |
| |
|
| Double lance |
|
| Our double lance combines a foaming lance with a high pressure lance – the swivel joint allows the operator to effortlessly change from one to other eliminating the removal of any lance. The model shown is a short lance manufactured for use in the car wash application. |
 |
| |
|
| Dirtkiller™ / Turbokiller™ Nozzle |
|
| The Dirtkiller™ / Turbokiller™ nozzle is a yardstick in high pressure cleaning. A precision high pressure pencil jet with immensely powerful cleaning effect rotates at high speed cleaning a circular area. Our Dirtkiller with stainless steel nozzle protector is supplied as a standard with our 599 hire version machine that is used by hire shops – the nozzle protector not only protects the nozzle but also can be used to knock off stubborn dirt when cleaning roofs, floors, paint etc… |
 |
 |
| |
|
| Variojet nozzle |
|
| The Variojet lance allows the easy changing from a needle-point jet, to a flat jet and by pulling the nozzle forward one obtains chemical injection under low pressure. |
|
| |
|
| Flat Cleaner |
|
| A side-to-side flat cleaner for the cleaning of flat surfaces for use with our smaller machines up to 220 bar, flow rate of 10-19 l/min and temperature up to 70C |
 |
| |
|
| Round floor cleaner |
|
| A round floor cleaner with rotating nozzles under the stainless steel guard reduces spray-up from the floor during the cleaning process. This feature means that it can be used in food processing areas as it greatly eliminates the dirt that is removed, from being sprayed up on other areas above the floor. It can be used with all our machines up to a pressure of to 220 bar, flow rate of 10-19 l/min and temperature up to 70C. They are currently available in a 420mm and 520mm option. |
  |
| |
|
| Straight Floor cleaner |
|
| Our locally manufactured stainless steel straight line floor cleaner has been manufactured to supply a product for the industrial market that has minimal working parts, is very competitively priced and has virtually no working parts that require maintenance. Our floor cleaner is available in a 400mm working width and it greatly facilitates the cleaning of floor surfaces to remove dirt and grime. The stainless steel cover ensures that spray from the unit is contained within the unit and the nozzles are directed directly onto the floor to ensure optimum cleaning results. It is suitable for all cleaning applications and the cost of the accessory makes it an attractive option for use with existing carwash, workshop and industrial installations where it can offer an additional option for cleaning the floor surfaces. Please specify the machine that it will be used with as we would need to adjust the nozzle sizes to ensure optimum performance. |
|
| |
|
| Suction hose with intake filter |
|
| The suction hose is supplied with our range of petrol and diesel motor driven units where the quality of the water source is unknown. The unit is supplied with a 3m pipe and intake filter and can also be used with any of our machines that are self-priming. |
 |
| |
|
| Sludge Sucker |
|
| The sludge sucker uses the pressure from the machine to create a suction effect for the pumping out of any body of water. The maximum outlet hose length, that can be used, is 6m.It is a very cheap alternative for pumping volumes of water or liquid matter up to 16000 L per hour. Due to the nature of the mechanism of suction it can be used to suck practically any type of liquid and has no working parts that require maintenance. It can also be used to refill a mobile tank that supplies the pressure cleaner from a source such as a reservoir or dam – see our “Kranzle Mobile”. |
 |
| |
|
| Sand Blasting Set |
|
| The sandblaster set is supplied complete with sandblasting unit, hose and suction pipe for the removal of paint, rust etc… from surfaces such as steel and galvanized iron. The simple attachment to your high pressure cleaner enables even a novice to perform this task, usually only done by specialized contractors. We recommend that eye protection be worn by operators. |
 |
| |
|
| Spray Guard |
|
| The spray guard is an attachment for lances that greatly reduce spray that tends to spray up on the operators shoes and clothing. It ensures that your operators can stay cleaner for longer and ensure a comfortable working situation. |
 |
| |
|
| Rotating brush |
|
| The rotating brush combines the water flow and a rotating brush action for scrubbing down walls, roller shutter doors and any uneven surface. |
 |
| |
|
| Flat brush |
|
| For the manual cleaning of outside furniture or any surface that you would wish to have a manual brushing action. |
 |
| |
|
| Pipe cleaning hose with nozzles |
|
| The pipe cleaning hose with nozzle is supplied in lengths of 10m, 15m, 20m and 30m and is for connecting to your machine and cleaning the inside of pipes, down-pipes or drains. |
 |
| |
|
| Kranzle Underfloor/Underbody Lance |
|
| The Kranzle Underfloor lance greatly facilitates the cleaning of the under-carriage of a vehicle to remove mud and soiling. This is an area that is sometimes neglected due to the difficulty of the cleaning task when using standard straight lances. It is also suitable for cleaning under tanks or any area that has a surface close to a floor. |
 |
| |
|
| Lance extensions |
|
| Lance extensions are available in 400mm and 1000mm length to extend the cleaning task to areas that may be out of reach. We could manufacture any specific length that you may require – consider the implication of the length and ease of operation for the operator. |
 |
| |
|
| Water intake filter |
|
| Our Kranzle water intake filter is available as an optional extra to be placed on the inlet water line prior to the water doing into the machine. It ensures that particulates are filtered from the water source. |
 |
| |
|
| Detergent injector |
|
| The low pressure detergent injector utilizes a “venturi” to suck detergent from the container for application of detergent or sanitizer onto the surface being cleaned. The action of turning our lance to low pressure or pulling out the Variojet nozzle reduces the pressure between the pump and lance, thus allowing detergent to be drawn into the system. The detergent is sucked in after the high pressure pump, thus eliminating any possible damage to the pump or inner working parts by corrosive chemicals. Please note that the inner Kranzle parts are brass and may corrode if aggressive chemicals are used. |
|
| |
|
| Lance holder |
|
| Our lance holder is manufactured from stainless steel with wall mounting brackets and ideally should be placed high enough off the floor surface to ensure storage of the lance without damage being caused to the nozzle by the floor surface.The lance holder was especially designed for the car and truck wash applications where lance where traditionally left on the floor. The lance holder ensures that guns and lances are out of the way from damage by being driven over or even just the action of being dropped or placed on the floor for storage during normal working. |
|
| |
|
| Wall mounted hose reel |
|
| Designed for easy storage of hose reel especially with wall mounted units where a standard hose reel is not fitted to the machine. |
|
